PRO Series wireless for violin & viola

Where technology meets elegance.

The B-11 Pro frees violinists and violists from wired pickups and cables. A violin-tuned condenser mic captures the true voice of your instrument and sends it in 24-bit/48 kHz with latency as low as 3.9 ms, so you play with the same feel as a cable.

NUX B-11 Pro gooseneck microphone transmitter mounted on a violin next to the B-11 Pro receiver with its color screen
3.9ms
Ultra-low latency

In Low Latency mode, as immediate as a cable

165ft
Long range

Up to 50 m line of sight

24-bit
Studio-grade audio

48 kHz, 20 Hz to 20 kHz, 112 dB dynamic range

6.5hrs
Transmitter battery

Receiver runs up to 11 hours on its own battery

Violinist performing on stage with the NUX B-11 Pro wireless microphone mounted on her violin

MADE FOR THE STAGE

Freedom to move, tone that stays true.

No cable to trip over and no wired pickup holding you to one spot. Walk the aisle at a wedding, step forward for a solo or lead worship from anywhere on the platform while the B-11 Pro keeps your violin sounding natural through the PA.

2.4 GHz wireless

Longer range. Lower latency.

Choose how the B-11 Pro balances speed and stability. Play in Low Latency mode for the most immediate response, or move toward Stable in crowded rooms full of Wi-Fi.

Response
3.9 ms
Stability
 

Lowest latency for solos and fast passages when the signal path is clear.

165ft

Up to 50 m of line-of-sight range from transmitter to receiver, enough for the largest sanctuary or ballroom.

TransmitterReceiver
Animation of intelligent frequency hopping moving the wireless signal away from Wi-Fi interference

PRO SERIES WIRELESS

Anti-interference, built in.

Intelligent frequency hopping monitors the 2.4 GHz band in real time and moves to the cleanest channel automatically. 1 MHz narrowband transmission, Audio Zip/Unzip processing, six selectable stability levels and a true-diversity dual-antenna design keep your signal locked in, even in rooms full of Wi-Fi.

Condenser instrument microphone

A microphone tuned for violin.

A cardioid condenser capsule voiced specifically for violin captures the warmth and detail of your instrument. Its newly designed shock-absorbing structure reduces vibration noise while making the mic assembly smaller and lighter on the instrument.

Cardioid pickup-46 dB sensitivityShock-absorbing mountFlexible gooseneckHot-shoe quick connect
B-11 Pro receiver screen cycling through violin EQ presets

TONE SHAPING

10 EQ presets, voiced for strings.

Ten professional EQ presets for violin and viola cover Classical, Modern and Warm voicings, plus two custom slots you can shape yourself. Switch with the EQ button on the receiver or a single press of the transmitter's power button.

B-11 Pro receiver screens showing Room, Plate and Hall reverb next to the transmitter reverb button

BUILT-IN REVERB

Room, Hall or Plate. One press away.

Add space to a slow movement without leaving your spot: toggle reverb with the button on the side of the transmitter, and fine-tune the details in the receiver menu. The transmitter's indicator shows which reverb is active at a glance.

Quick installation

Clips on in seconds. Stays put all night.

Fix the transmitter mount to the edge of your instrument with its threaded knob, then the magnetic transmitter snaps on and off in one move. Mounts for both violin and viola are included, and the gooseneck lets you aim the capsule just behind and above the bridge.

Violin mount36–40 mm1.42–1.57 in body thickness
Viola mount42–45 mm1.65–1.77 in, selected models

Tolerance ±1 mm (±0.04 in). Measure your instrument's edge thickness before ordering.

B-11 Pro transmitter beside its mount fixed on the edge of a violin B-11 Pro magnetic transmitter attached to its mount on the edge of a violin
B-11 Pro transmitter magnetically charging on top of the receiver
Cutaway of the B-11 Pro receiver and transmitter showing the built-in lithium batteries

HIGH-CAPACITY LITHIUM

Power for the whole service, and then some.

The transmitter runs up to 6.5 hours on a full charge, and the receiver carries its own 3000 mAh battery for up to 11 hours. At a break, set the transmitter on top of the powered-on receiver and it tops up magnetically, no cables needed.

B-11 Pro receiver footswitch menu assigning Tuner to press and Reverb to hold

HANDS-FREE CONTROL

One footswitch, your shortcuts.

Assign a short press and a long press to Boost (0 to +12 dB), Mute, Tuner, S/R Bypass or Reverb from the receiver menu. The high-sensitivity tuner and 2.4" color screen keep every check quick and readable on a dark stage.

Connections

Plugs into any rig.

A balanced XLR DI with ground lift, 1/4" output, a send/return effects loop and USB-C audio. The receiver fits straight into a church sound system, a gigging pedalboard or your home studio.

Connection diagram: violin with B-11 Pro transmitter to the receiver, then XLR or 1/4 inch out to a PA speaker or mixer
Connection diagram: B-11 Pro receiver with an effect pedal in the send and return loop, out to a PA speaker or mixer
B-11 Pro receiver connected by USB-C to a computer for digital recording
Steps to upload a custom GIF boot animation to the B-11 Pro receiver

Run the balanced XLR DI or the 1/4" output to a PA speaker, mixer or amp. If you hear hum on the XLR line, flip the ground lift switch.

Patch your pedals into SEND and RETURN, then take the RETURN OUTPUT to your amp. Assign S/R Bypass to the footswitch to bring the loop in and out.

Connect to a computer or phone over USB-C for direct digital recording. Some phones need an OTG adapter, and Windows users can install the NUX ASIO driver.

Load any GIF as the receiver's boot-up animation with the free NUX B-11 PRO GIF Customizer and a USB cable.

Tech specs

Everything, in detail.

Wireless

Operating band
2.4 GHz ISM (2.4–2.4835 GHz)
Range
Up to 50 m (165 ft), line of sight
Latency
3.9 ms (Low Latency) / 6.4 ms (Default) / 10.2 ms (Stable)
Anti-interference
Intelligent frequency hopping, 1 MHz narrowband, true-diversity dual antennas, 6 stability levels
Transmission power
< 10 mW E.I.R.P

Audio

Audio quality
24-bit / 48 kHz
Frequency response
20 Hz – 20 kHz
Output dynamic range
112 dBA (SEND/OUTPUT)
THD+N
< 0.01% @ 1 kHz
Max audio output
6.4 dBV (SEND/OUTPUT)
Tone tools
10 EQ presets + 2 custom, Room / Hall / Plate reverb, 0 to +12 dB boost, tuner

Microphone

Type
Condenser, cardioid
Sensitivity
-46 dB

Receiver I/O

Outputs
XLR DI out (with ground lift), 1/4" OUTPUT/SEND, 1/4" RETURN OUTPUT
Effects loop
1/4" SEND / RETURN
USB
USB-C audio, firmware and boot screen updates (not for charging)
Display
2.4" color screen
Power
DC 9 V, 1 A min., negative tip

Battery & size

Transmitter battery
3.7 V / 450 mAh, up to 6.5 hours
Receiver battery
3.7 V / 3000 mAh, up to 11 hours
Transmitter
44.6 × 55.5 × 18.1 mm, approx. 33 g (excl. mic)
Receiver
90 × 115 × 55 mm, approx. 468 g
Mount fit
Violin 36–40 mm, viola 42–45 mm body edge (±1 mm)

B-11 Pro FAQs

Will the B-11 Pro fit my violin or viola?

The included violin mount fits a body edge thickness of 36–40 mm (1.42–1.57 in), and the viola mount fits 42–45 mm (1.65–1.77 in) on selected viola models, with a tolerance of ±1 mm. Both mounts come in the box, so measure the edge of your instrument and use the one that matches.

How does the transmitter attach?

Tighten the mount onto the edge of the instrument body with its threaded knob, slide the microphone's hot-shoe connector into the transmitter and lock it, then bring the transmitter's magnet into contact with the mount. Between gigs it lifts straight off and docks on the receiver to charge.

Where should I aim the microphone?

Point the capsule toward the area just behind and above the bridge. Small changes in position change the tone, so adjust the gooseneck until it sounds right in your room, then fine-tune with the EQ presets.

How do I charge it?

Power on the receiver and place the transmitter on its magnetic charging position; the transmitter's indicator glows red while charging. The receiver charges from the included DC 9V 1.2A adapter. The USB-C port is for audio and updates only, not for charging, and NUX recommends using only the original adapter.

How long does the battery last?

Up to 6.5 hours for the transmitter and up to 11 hours for the receiver on a full charge.

Can I connect it to a PA, mixer or amp?

Yes. Use the balanced XLR DI out for mixers and PA systems (with a ground lift switch to kill hum), or the 1/4" output for an amp or powered speaker. You can also run pedals through the send/return effects loop.

Can I record with it?

Yes. Connect the receiver to a computer or phone with USB-C for digital recording. Some phones need an OTG adapter, and Windows users can install the NUX ASIO driver from the downloads list above.

What if I hear dropouts or interference?

Move the transmission setting toward Stable, keep a clear line of sight, and keep the receiver away from Wi-Fi routers, computers and other 2.4 GHz devices. The receiver can sit near you on stage with a long cable to the mixer. If you run several wireless systems, keep at least 1 m between them.

What warranty and shipping come with it?

B-11 Pro systems bought on nux.us include a 3-year NUX warranty and complimentary U.S. shipping and returns. Our U.S. support team is available Monday to Friday, 9 AM to 5 PM Pacific.